During the forward-facing camera installation process, you will need to connect your device's power cable to the vehicle power source. You will notice 5 wires connected to your power source:
SureCam connected camera installation typically only requires the use of the red, black, and brown wires listed above. The additional green and white wires are sometimes used by European fleets with additional specialty hardware.
However, unless otherwise specified, most fleets will not have a need for these wires and they can be disregarded during the installation process. We often recommend separating them and sealing them off with electrical tape or another appropriate clamping device.
For additional assistance with wiring, check out our Forward and Dual-Facing Installation Guides, or reach out to Support@SureCam.com (US clients) or CustomerServiceUK@SureCam.com (global clients) for assistance.